Spectralyzer v1.11
Download Free Software For a 60 Day Trial Period
SPECTRALYZER
- Ultrasonic FFT Spectral Analysis Software
- 44.1KHz Max Sampling Rate Supported (hardware dependant Averaging: Vector, Peak Hold, RMS
- Frequency Span: (0 to 1/2 of selected sampling rate)
- Weighing: Exponential, Linear
- Single Channel Operation
- FFT Windowing
- Spectral Overlays
- Modes: Realtime, Record & Playback
- Narrowband FFT sizes through 32,768 points
- Cursors: Frequency & dB, Harmonic & Alarm
- Displays: Spectrum & Time Series
- Alarm Cursor: Low Frequency, High Frequency & dB Setpoints
- Frequency Markers
SPECTRALYZER ULTRASONIC SPECTRAL ANALYSIS SOFTWARE
Use the link above to begin the download process for your 60 day trial of the Spectral Analysis Software. You may also view, system requirements, specifications and data and/or help with installation.
Spectralyzer v1.11 PC Software-Based Spectrum Analysis Program . . . $995.00
Features include single channel operation; Realtime, Record and Playback Modes; Spectrum & Time Series Displays; 44.1KHz Sampling Rate; Frequency Span up to 1/2 of Selected Sampling Rate; Narrowband FFT Sizes through 32K Points; Spectral Overlays; Frequency Markers; Averaging; Spectral Weighing; FFT Windowing; Cursors - Frequency & dB, Harmonic and Alarm; Alarm Cursor has Low & High Frequency and dB Setpoints; Playback Mode provides Comprehensive Analysis from Wave Files.
SYSTEM REQUIREMENTS
Hardware Requirements
- IBM PC or compatible with Pentium III 400 MHz CPU or a higher.
- 128 MB RAM minimum 256 MB or higher for long recordings.
- VGA monitor capable of displaying 256 colors.
- Hard disk with 20 MB free space. Additional space to save long audio flies.
- Windows compatible sound card: 16-bit card recommended.
- Mouse or other pointing device.
Operating System Requirements
- Microsoft Windows 98, 2000, Millennium, Windows NT 4.0 or newer, Windows XP.
Help With Installation
After completing registration form, click the "Click Here To Submit" button to download Spectralyzer.
Once this is done, the Spectralyzer file (vspa1.11.zip) will start to download to your computer. This will take a few minutes depending on your internet connection speed.
Once the file is completely downloaded you will see your save as window open asking you to save the file.
- Select the folder you want to save in and then click on save.
- Now find the file (vspa1.11.zip) in the folder you saved it to.
- Once found, right click on the file (vspa1.11.zip) and unzip.
NOTE: If you do not have WinZip, please click here to download first before you open up the file.
- Once the file has been unzipped, click on "Setup".
- Now follow the on screen instructions.
| 
